We want to
supply the best sounding triodes, with the highest possible mechanical
and electrical quality.
We work the traditional way, and we
have all critical processes in-house. Like this, we depend as little
as possible on other companies for technical support. We use hard metal
for all critical parts of the tube, and produce every part and piece part
ourselves. This starts with the complete glasswork, and even
for the pins of the tube base we have our own tools. Like this, we ensure
our customers receive reproducable quality.
May be some of you have experience with the
new
VAIC tubes. These are the ones with the black + gold tube bases.
These were made in our factory since 1999. (These should not
be confused with AVVT tubes, made by Alesa Vaic - these have white
sockets) We are proud to say, that we have a defect rate with our
tubes of less than 0,5%. Those who have experience with power tubes,
will know what it takes to reach this number. Our product range reaches
from a dual rectifier, or a small tube like the Type 45 to the world's
largest availble single plate DHT triode like the 520B-V2.
We plan no changes to the tubes. They
don't need that, and we make them the same way triodes were build since
60 years. We want to stay what we are. A small, technical oriented
company, making products the traditional way, with the highest possible
quality standard. We have some new tubes in the pipeline,
like a mesh version of the Tye 45, and a large size 2A3 which is
compatible with the 28Watt KR2A3.
|